LIMIT ECO retractable belt barrier post
Custom-printed 3 or 4 m belt · Height: 95 cm · Base: Ø 36 cm · Weight: 8 kg · Retraction brake
from CHF 79.90
From CHF 79.90
Per post, minimum order of 6 · Excl. VAT
Shipping from approximately CHF 60, plus a CHF 45 customs clearance fee
Get your price →
Custom-printed belt
Your brand, your colours, your message. Full-colour sublimation printing on 3, 6 and 9 m belts.
Learn more →
Post tube with printed vinyl wrap
Customise the steel tube with a vinyl wrap featuring your chosen Pantone colour, logo or artwork.
Learn more →
Custom-printed top cap
Your logo on top of the post. A small detail that completes the look.
Learn more →
Examples of printed belts
Read more
Belts we have made
Real examples of customer belts, each designed and printed at our Barcelona factory.
Dlimit is the online brand of Dlimit Tactic S.L. (Mataró). Our belts are printed at our Barcelona factory, where we have been manufacturing belt barrier systems since 1997. We supply international chains in the electronics, automotive, fashion and beverage sectors, as well as museums, airports and shops across Europe.
1 cm base: wheelchair-friendly
Read more
Accessibility A base designed for easier access.
The universal base is just 1 cm high. Wheelchairs, pushchairs and wheeled suitcases roll over it easily, while its low profile reduces the risk of tripping.
1 cm
A base just 1 cm high
Developed and tested with people with reduced mobility. Its low profile reduces the risk of tripping and can help you meet accessibility requirements in buildings open to the public.
Base comparison
| Our base · 1 cm | Typical concrete base | |
|---|---|---|
| Height | 1 cm | A dome several centimetres high |
| Wheels | Wheelchairs, pushchairs and luggage roll over it | Wheels have to go round it or ride up over the edge |
| Tripping | Almost flat profile, lower risk | Easier to catch your foot on the raised edge |
| Material | Steel ballast with an ABS cover | Shell filled with concrete |
| Knocks | Steel does not crack or chip | Can crack or chip |
| Floor | Six rubber pads protect the floor | Depending on the model, no protection |
| Spare parts | Base fixed to the tube with a standard M12 screw, replaceable | Base and tube often joined, hard to replace |
Pushchairs and pramsPushchairs move through the queue without users having to lift the wheels over the base.
Wheeled luggageWheels roll over the base more easily, helping to reduce knocks against the posts.
WheelchairsA wheelchair can roll over it with little effort, while the low profile reduces the risk of tripping.
Printing: double-sided sublimation
Read more
Printing Sublimation printing on both sides.
The ink turns into gas and penetrates the polyester fibres on both sides of the belt. With no surface film, the print withstands repeated retraction during everyday use.
↓ Download the technical data sheet (PDF)
Sublimation compared with other printing methods
| Sublimation | Screen printing | Heat-press transfer | |
|---|---|---|---|
| Colours | Full colour: photos, gradients, Pantone matching | 1–4 spot colours, one screen per colour | Best with spot colours |
| Durability | The ink is part of the fibre | Ink layer that can wear off | Film that can crack with use |
| Retraction | Belt stays thin and flexible | Stiffer printed areas | Thicker belt, may rub in the cassette |
| Both sides | Yes, at no extra cost | Second pass, extra cost | Harder to align |
| Short runs | Yes, no set-up cost | Screens make short runs expensive | Yes, but slow and manual |
| Feel | Smooth, not raised | Raised ink | Raised plastic layer |
Where they are used: stations, airports, museums, shops
Read more
Applications Wherever people queue.
Retail · Events · Trade fairs · Hotels · Banks · Clinics · Offices · Sports venues
Why order from us
Read more
Why order from us? Instant quotes. No waiting. No large minimum order.
See how ordering a printed belt from us compares with the usual process of requesting quotes from several suppliers and waiting for their replies.
A point-by-point comparison
| Dlimit | The usual route | |
|---|---|---|
| Price | Instantly on screen and as a PDF quote, without entering any personal details | You ask for a quote and wait for the reply |
| Quantity | From 6 posts | Large runs to make it worthwhile |
| Set-up | No set-up or design costs | Screens, plates or machine set-up charged separately |
| Proof | Free digital proof before production | Proof charged, when there is one |
| Lead time | About 10 working days, stated up front | “On request” |
| Who makes it | Our Barcelona factory, since 1997 | There is usually a middleman |
The right-hand column describes a typical quote-based purchasing process in this sector. It does not refer to any specific supplier.
How to order Your order in 3 steps.
- 1Configure your products and upload your logo
Choose your products and quantities, check your price and upload your logo.
- 2Approve your free digital proof
We send you a digital proof of your belt. Nothing is produced until you approve it.
- 3Production and delivery
We print your belts using sublimation and assemble your products at our Barcelona factory. Allow approximately 10 working days for production and delivery to your door.
Video call Before you order, let’s meet.
Max Liarte · Customer advisor, SwitzerlandRead more
Our showroom is called Max.
A 15-minute video call. Max shows you the products live, answers your questions and prepares your quote with you: you get it as a PDF at the end of the call.
- Free, with no obligation
- Monday to Friday, 8 am to 1 pm (Swiss time)
- Google Meet, Microsoft Teams or Zoom
- English, Français · Deutsch and Italiano with live translation
- Or 5 minutes for a quick question
What you won’t get: sales pressure, follow-up chasing or price surprises. The price is already online: Max doesn’t negotiate, he advises you on the right quantity.
Max LiarteCustomer advisor, SwitzerlandSecond generation · family business since 1997
Frequently asked questions
Read more
FAQ Frequently asked questions
How does ordering work?
Configure your products, enter your postcode to see the total price, then request a pro forma invoice. We send you the digital proof and the pro forma invoice; production starts once you have approved the proof and paid. Our ordering guide shows every step with screenshots: download the guide (PDF).
What is the minimum order quantity?
Six posts, packed two per box, with each box weighing 18 kg. There are no setup or design fees, and the unit price is the same as for a larger order.
When and how do I pay?
No payment is required when you submit your request. We send you a digital proof of your belt and a pro forma invoice. Once you have approved the proof and accepted the invoice, you pay by bank transfer and we start production. From that point, allow approximately 10 working days for production and delivery.
What file format should I provide?
Ideally, a vector file in SVG, PDF, AI or EPS format. A high-resolution PNG or JPG is also suitable. We check your file and send you a free digital proof.
Is the belt printed on both sides?
Yes. We print both sides using sublimation at no extra cost, even if you want a different design on each side. Specify this in your order, and we will show both designs in the digital proof.
How long does delivery take?
Allow approximately 10 working days after proof approval: 3–5 days for production, plus shipping.
How much does shipping cost?
Shipping is calculated automatically in the order summary based on your postcode, across six delivery zones, and the order weight. A flat customs clearance fee of CHF 45 is added. No import duty applies. Swiss import VAT of 8.1% is collected by the carrier on delivery.
Do prices include VAT?
All prices are in Swiss francs, excluding VAT. Orders exported to Switzerland are invoiced without Spanish VAT. Swiss import VAT of 8.1% is collected by the carrier on delivery; VAT-registered businesses can reclaim it as input tax. No import duty applies.
Can I order additional belts later?
Yes. We keep your design on file to make reordering quick and easy.
What materials is the post made from?
The tube is made from powder-coated steel. The standard base is made from black ABS with a steel ballast weight, and a coloured steel base is available as an option. The belt reel and the bottom tube plug are made from polypropylene (PP), while the base pads are rubber. The steel can be recycled at the end of the product’s life.
Can I build a queue management system with these posts?
Yes. Belt barrier posts form the queue line at counters, tills or entrances: one post per end and per corner, with 3 or 4 m of belt between them. Against a wall, the wall-mounted belt unit takes the place of a post.
Our products at a glance
Read more
Products One system. Three components.
These products are also known as queue barriers, crowd control posts, stanchions or retractable belt posts. In shops and banks, they are often referred to simply as queue posts.
Wall-mounted belt barrier · 3 / 6 / 9 m
Mounted on the wall, with your custom-printed belt. Available in 3, 6 or 9 m lengths.
from CHF 84.95
Sign holder
Fits on top of the post · A4 or A3 · Portrait or landscape · Optional acrylic cover
from CHF 49.40
Get your quote
Open the configurator
Configurator Design your belt and get your quote.
1 · Choose your products
LIMIT ECO retractable belt barrier post
Custom-printed 3 or 4 m belt · Height: 95 cm · Base: Ø 36 cm · Weight: 8 kg · Retraction brake
CHF 79.90 per unit
Supplied in boxes of 2 posts · Shipping from approximately CHF 60, plus a CHF 45 customs clearance fee
Post colour: Black
↓ Technical data sheet (PDF)
Recycled ABS base cover included as standard. Optional painted steel cover to match the post colour.
Express · retractable belt barrier posts from stock Available from stock, with unprinted 3 m belts. Minimum 10 posts, in boxes of 2. Choose your post and belt colours. Dispatched on the next working day after payment is received. CHF 79.90 per post · from 10 units Post colour: Black Belt colour: Red Recycled ABS base cover included as standard. Optional painted steel cover to match the post colour.
Wall-mounted belt barrier
Mounted on the wall, with your custom-printed belt. Available in 3, 6 or 9 m lengths.
Colour: Black
excl. VAT · Shipping from approximately CHF 60, plus a CHF 45 customs clearance fee
↓ Technical data sheet (PDF)3 m CHF 84.95
6 m CHF 115.809 m CHF 171.40
Accessories
Additional wall receiver CHF 18.70An additional receiver that lets you attach the end of the belt at another position on the wall.
Magnetic mounting kit CHF 54.05Secures both the wall-mounted belt barrier and its receiver to metal surfaces, without drilling.
3 m CHF 84.956 m CHF 115.809 m CHF 171.40
AccessoriesAdditional wall receiver CHF 18.70An additional receiver that lets you attach the end of the belt at another position on the wall.Magnetic mounting kit CHF 54.05Secures both the wall-mounted belt barrier and its receiver to metal surfaces, without drilling.
Sign holder
Fits on top of the post · A4 or A3 · Portrait or landscape · Optional acrylic cover
CHF 49.40 per unit
Shipping from approximately CHF 60, plus a CHF 45 customs clearance fee
A4 portrait CHF 49.40A4 portrait · with acrylic cover CHF 67.95A4 landscape CHF 49.40A4 landscape · with acrylic cover CHF 67.95A3 portrait CHF 80.30A3 portrait · with acrylic cover CHF 112.75A3 landscape CHF 80.30A3 landscape · with acrylic cover CHF 112.75
↓ Technical data sheet (PDF)
2 · Customise your belt: logo and colour
Open
Create your own design and preview the result
Upload your logo and preview the layout along the full 3 or 4 metres, on both sides. Then return here with your design ready.
Preview your logo on the belt →or
Send us your logo and we’ll prepare the layout
Simply provide your logo and preferred background colour, and we’ll prepare your digital proof.
Simplified preview. Your digital proof will show the final layout.
PNG with a transparent background, SVG, PDF, AI or EPS.
Belt background colour
Choose your preferred colour. If your artwork already includes a background, leave this setting on white and let us know below.
Request a pro forma invoice →
You have not uploaded your logo yet.
If you do not have it to hand, send the request anyway and we will ask you for it by email.
Free sample
Read more
Sample See and feel the belt before ordering.
We send you a printed belt sample featuring example designs, so you can assess the material and print quality. Free, with no obligation. Available exclusively to businesses and professionals, with a limit of one sample per company.
Request a pro forma invoice
Open
About us
Read more
About us Direct from the manufacturer.
Since 1997
Dlimit.net ↗We design and manufacture belt barrier systems at our Barcelona factory.
Our full range of belt barriers and queue management systems, available at dlimit.net.
Dterminal ↗Terminals and ceiling-mounted systems for airports and railway stations, available at dlimit.net.
Dsafety.eu ↗Our industrial safety range for warehouses, factories and construction sites, available at dsafety.eu.
Acustika.es ↗Acoustic panels made from recycled PET, manufactured in Mataró, near Barcelona.
Skrita.net ↗Magnetic glass whiteboards, acoustic screens and shelving, designed and made in Mataró.
Head office and factory · 08302 Mataró (Barcelona), Spain